Flange and Bulkhead Fittings for Plastic Storage Tanks

Flange Fittings for Polyethylene Bulk Containers

Flange Fittings for polyethylene bulk containers.

Flange fittings for polyethylene bulk containers provide a means to connect inlet or drainage plumbing through the wall of the tank. Secured by metal bolts encapsulated in EPDM or VITON elastomers which provides compression for a positive seal. Order by size and material. Bolts, gasket and flange must be ordered separately. Assmann's ANSI-150 psi flange adapter, consisting of nipple and flange, converts a threaded connection to a mating flange. Length of the adapter can be made to your specifications. Siphon drain consists of welded nipple, 90° elbow and nipple to extend to 1/2-inch above tank floor.

Flange Fittings Available Sizes (inches)
Size 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 6 8
Bolts 4 4 4 4 4 4 4 4 8 8 8

Plastic Tank Bulkhead Fittings for Chemical Storage

Plastic tank bulkhead fittings.

Bulkhead fittings for plastic tanks are economical tank to plumbing connections available in a variety of materials. Bulkhead fittings and gaskets must be ordered separately. Siphon drains are threaded to fit to bulkhead fittings. Assmann's ANSI-150 psi flange adapter, consisting of nipple and flange, converts a threaded connection to a mating flange.

Bulkhead Fittings Available Sizes (inches)
Size 1/2 3/4 1 1-1/4 1-1/2 2 3 4

 

Assmann Corporation of America
300 North Taylor Road, Garrett, IN 46738 USA
888-357-3181 or 260-357-3181